|
|
|
 |
 
 m系列.pdf
Glossary:
WCC: Welding Cabinet Controller
EL: Effective Length
ED: Effective Depth
SS: Single Stroke cylinder
DS: Double Stroke cylinder
Manual adjustment: Adjustment is
performed by a pressure regulator
which determines the compressed
air supply of the cylinder in order to
obtain the best clamping force.
Electronic adjustment: The
adjustment of the welding force of
the cylinder is controlled by a
proportional valve.
Pressure program: This device
allows the pressure to be varied
during the force, for example, to
reduce it when welding or to
increase it again during the hold
ARO, world leader in resistance welding, offers innumerable solutions for spot or projection
welding applications, within the 50％ of 30 kVA and 50 kVA power ranges.
This new range of M machines, completely updated and redesigned, is structured around a
single frame, with a choice of 2 pneumatic cylinders, 2 transformers and a range of 6
welding cabinet controllers (WCC). The user therefore has access to a wide range of
possibilities to control better the welding current and the clamping force.
The pneumatic M series is equipped in standard version with a wide diversity of
equipment such as:
- Electric pedal,
- Filter, pressure regulator and purge valve assembly for air circuit,
- 740 daN cylinder using non-lubricated air at 6 bars,
- Distributor for pneumatic cylinder control,
- Safety pressure switch,
- Integrated welding controller,
- Program selector,
- With/without current selector,
- Machine stop,
- Mains power supply switch,
- Standard 400 V/50 Hz power supply.
To complete its basic equipment, a wide range of options is proposed:
MA MC MD MB
􀁑For the frame
150 mm machine hightener 􀀻 􀀻 􀀻
Column-mounted lower arm 􀀻 􀀻 􀀻
􀁑For welding cabinet controller
6 sequence versions (AR.01, 5T2P, 7T8P,10T16P, 10T32P, 10T16PEC) 􀀻 􀀻 􀀻
Welding cabinet controller protective window 􀀻 􀀻 􀀻 􀀻
􀁑For controller
Double-effect pedal (squeeze without welding) 􀀻 􀀻
Separate welding controller 􀀻 􀀻 􀀻 􀀻
􀁑For pneumatics
Double stroke cylinder 􀀻 􀀻 􀀻
Opening/closing position control 􀀻 􀀻 􀀻
􀁑For controlling force
Electronic adjustment 􀀻 􀀻 􀀻
Pressure program 􀀻 􀀻 􀀻
Analog pressure sensor 􀀻 􀀻 􀀻
􀁑Choice of electrical power supply:
230 V/50 Hz 􀀻 􀀻 􀀻 􀀻
230 V/60 Hz 􀀻 􀀻 􀀻 􀀻
400 V/60 Hz 􀀻 􀀻 􀀻 􀀻
440 V/60 Hz 􀀻 􀀻 􀀻 􀀻
480 V/60 Hz 􀀻 􀀻 􀀻 􀀻
 |
| 时间:2012/12/7 |
|
[关闭] |
|
|
|
|
写信留言
